Sony PCWA-C100 Owner's Manual page 59

Additional information
4 Select Sony PCWA-C100 Wireless Card.
5 Click Release.
6 Click Renew.
Verify that the IP address obtained is suitable for your network environment.
To release and obtain an IP address when using Windows
1 Remove the Access Point from a LAN.
2 From the Start menu, select Programs, Accessories, then Command Prompt.
3 Enter ipconfig /release and press the <Enter> key.
4 Enter ipconfig /renew and press the <Enter> key.
The IP address appears.
5 Enter ipconfig /all.
Verify that the IP address obtained is suitable for your network environment.
Precautions
❑
Do not drop or cause mechanical shock to the Wireless LAN PC Card, as this may damage the unit.
❑
Do not place the Wireless LAN PC Card where it will be exposed to the following conditions:
❑
unstable surface;
❑
high humidity or poor ventilation;
❑
excessive dust;
❑
direct sunlight or extreme heat;
❑
closed cars;
❑
magnetized location (near magnets, speakers or televisions);
❑
locations exposed to frequent vibration;
®
2000 Professional, proceed as follows:
n N
58