Sony PCWA-C100 Owner's Manual page 52

Wireless LAN connection
2 Click Upload.
The settings are uploaded to the Access Point. Please wait until the Access Point's Power indicator
turns green.
3 When the confirmation dialog box appears, click Finish to exit.
✍
If you select Cable Modem or LAN, set up the device for an Internet connection.
DSL Modem (PPPoE) mode:
When the Enter DSL Modem (PPPoE) Connection Parameters dialog box appears, proceed as follows:
1 Enter the Account ID and Password provided by your Internet service provider, then choose the
Connection Mode option from the drop-down list.
❑
Your Internet service provider may specify the DNS server(s). In this case, enter the DNS Server
information into the DNS Server 1 and DNS Server 2 fields.
❑
In Connection Mode, you can choose the method of connecting to the Internet. If you choose
Always Connected, the Access Point will connect to the Internet and stay connected. If you choose
Auto Connect, the Access Point will automatically connect to the Internet when you check your
email or run the Web browser. It will automatically disconnect after some period of time has passed
with no data transmitted through the Internet. The time before disconnection can be set in Hangup
After.
❑
Some Internet service providers specify a service name. In that case, enter the service name using the
Custom Access Point Setup Utility.
2 Click Next.
The settings made in the Enter DSL Modem (PPPoE) Connection Parameters dialog box are
displayed.
3 Make sure that you have made the correct settings, then click Next.
Notes are displayed regarding the DSL Modem (PPPoE) mode. Read them carefully.
n N
51