Gcx Mounting Procedure - GE Dash Port 2 Service Manual

GCX Mounting Procedure

3-8
Installation: Equipment Mounts
The following procedure shows how to mount the docking station to a
GCX pedestal mount. This mounting procedure is the same for the M
Series and Locking VHM arm wall mounts.
1. Slide the docking station onto the GCX mount until it bumps into the
locking pin.
locking pin
2. Pull down and hold onto the locking pin and continue to slide the
docking station onto the GCX mount. Then let go of the locking pin.
3. Verify the locking pin clicks into position to secure the docking
station to the GCX mount.
Dash Port 2 Docking Station
2000966-138
032A
033A
Revision A