Setting Up Nc Card And Device Driver (Pci Nc Card) - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4. Setting up MELDASMAGIC64 System
4.2 Setting Up NC Card and Device Driver (PCI Card)

4.2 Setting Up NC Card and Device Driver (PCI NC Card)

This chapter describes the installation of NC System Device Driver for PCI NC Card and the
procedures for mounting NC Card. (For ISA NC Card, refer to chapter 4.3)
By installing NC System Device Driver, the device driver for NC Card and the MELDASMAGIC64 NC
System Software are installed.
For the details of the method for mounting NC Card, refer to "Connection Manual (BNP-B2203)."
The installation procedures of NC System Device Driver differ by each Windows model.
For Windows 2000/XP, refer to chapter 4.2.1. For Windows 98 Second Edition, refer to chapter 4.2.2.
* PCI NC Card cannot be used for any OS other than Windows 2000/XP or Windows 98 Second
Edition.
!
CAUTION
Be sure to remove NC Card out of the personal computer before installing NC Device Driver.
10
Downloaded from ManualsNet.com search engine