Introduction; Types Of Nc Card - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

2. Introduction

2.1 Types of NC Card

Two types are available as MELDASMAGIC64 NC Card: one type is connected to the PCI bus and
the other connected to the ISA bus. In this manual, the former type is referred to as PCI NC Card and
the latter type as ISA NC Card.
System requirements for using NC Card are different between PCI NC Card and ISA NC Card.
Check "2.2 System Requirements" to set up NC Card.
Figure2.1 PCI NC Card
Figure2.2 ISA NC Card
Downloaded from ManualsNet.com
BAT
BAT
SODIMM2 SODIMM1
search engine
2. Introduction
2.2 System Requirements
HR655A+HR183 card
BAT
CIO
IR Q DPADR
CIO
2
HR623C card
HR621B card