Backing Up Nc Parameters - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4.7.4 Backing Up NC Parameters

When NC data have been set up, create a backup file for the parameters.
!
CAUTION
If NC data are lost due to some unforeseen problem, the parameters can be restored using the
file created here. Be sure to create the backup file.
Create the backup file according to the procedures below.
Insert the formatted floppy disk into drive A.
Use the file transfer utility (magictrs.exe) to copy the "\PRM\PARAMET.BIN" file on NC
Card to the A drive of the personal computer.
[Procedures]
(1) Click the [Programs] - [MELDASMAGIC] - [File Transfer] menus from the taskbar [Start] menu to
start the file transfer utility.
(2) Select the "Mxx:\PRM\PARAMET.BIN" file on the [NC] side of the "File Transfer" window.
* Specify the NC Card No. being set up on the xx of "Mxx."
(3) Select the "A:\" directory on the [PC] side.
(4) Click the
Operation: The file is copied.
Exit the file transfer utility.
Store the floppy disk with the copied parameter file in a safe place.
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
button (for copying the file from NC Card to the personal computer) to copy the file.
search engine
4.7 Setting Up NC data
73