Setting Up Runtime Library; Installing Runtime Library - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4.4 Setting Up Runtime Library

Here, set up Runtime Library for controlling NC Card from application software on the personal
computer. In the setup operation, install Runtime Library and configure NC Card.

4.4.1 Installing Runtime Library

Install Runtime Library according to the procedures below.
Install Runtime Library by executing setup.exe on the "Custom API Library Runtime Disk 1"
floppy disk.
[Procedures]
(1) Insert the floppy disk titled "Custom API Library Runtime Disk 1" into drive A.
(2) Click the [Run...] menu of the [Start] menu on the task bar.
Operation: The [Run...] window appears.
(3) Enter the following in the [Open:], and then click [OK].
A:\setup.exe
Operation: The installation program is started up.
(4) Install the software according to the directions from the installation program.
In ordinary cases, leave the settings default and select [Next >].
If "Setup Needs The Next Disk" window appears, insert the next disk into drive A, and then click
[OK].
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.4 Setting Up Runtime Library
search engine
64