Assigning An Nc Card No. To Pci Nc Card - Mitsubishi Electric CNC MELDASMAGIC Series Instruction Manual

4.4.2 Assigning an NC Card No. to PCI NC Card

Here, assign an NC Card No. to NC Card. This NC Card No. allows the application operating NC Card
to identify the NC Card.
The NC Card No. is necessary even if only one NC Card is actually mounted on the personal
computer.
Assign an NC Card No. according to the procedures below.
Input the NC Card No. on the [Settings] page of "Mitsubishi PC-Based NC MELDASMAGIC64
(HR6xxx) Properties" window.
[Procedures]
(1) Double-click [Other Device] on [Device Manager], and [Mitsubishi PC-Based NC
MELDASMAGIC64 (HR6xxx) Properties].
For WindowsNT, [Numerical Controller] window is displayed. Click [MELDASMAGIC64 (HR62xx)]
on [Devices], and then click [Settings...] button.
Display sample for WindowsXP
Downloaded from ManualsNet.com
4. Setting up MELDASMAGIC64 System
4.4 Setting Up Runtime Library
search engine
* For the method of displaying the [Device Manager],
refer to each chapter as follows.
For WindowsXP
For Windows2000
For Windows98/98SE
For Windows95
* For WindowsNT, [Numerical Controller] is
displayed. For the method of displaying the
window, refer to chapter 4.3.3.4.
Display sample for WindowsNT
66
chapter 4.2.1.4
chapter 4.2.1.4
chapter 4.2.2.4
chapter 4.3.1.3