Handheld Programmer: Key Functions In Run Mode - Siemens Sitrans Probe LU Instruction Manual

Oxley Creek WWTP Water Reclamation
(Probe LU Manual) Vendor Manual
Within Program Mode, the handheld programmer has two sub-modes of operation:
1. Navigation Mode
• Press Mode key
Mode: the rightmost digit of the menu number flashes, and the PROGRAM icon
• Press Up/Down arrows to change the mode number.
• Press Right/Left arrows once to move to the next/previous menu.
• Press Right arrow a second time to change the mode from Navigation to Edit
mode.
2. Edit Mode
• In Edit mode, the PROGRAM icon
• Press the number keys to enter parameter data.
• Press Right arrow to accept the new value and return to Navigation Mode.
• Only parameter items can be in Edit mode.
• In the case of read-only parameters, no change is permitted.
Note:
For Quick Access to parameters via the handheld programmer, press Mode key
to activate PROGRAM mode, then enter the menu number (see
menu structure

Handheld Programmer: key functions in RUN mode

Key
7ML19985JB02
to switch from RUN to PROGRAM and enter Navigation
is not visible.
on page 49.
Updates internal enclosure temperature value and displays it in LCD secondary region.
Updates echo confidence value and displays it in LCD secondary region.
Updates measurement value and displays it in LCD secondary region.
SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
Doc Id: VM11
Active Date: 15/12/2006
appears and flashes.
Function
Appendix E: LCD
Page 43