Statistics - Siemens Sitrans Probe LU Instruction Manual

Oxley Creek WWTP Water Reclamation
(Probe LU Manual) Vendor Manual
1.3.5. Write Locking
Prevents any changes to parameters via PDM or the handheld programmer.
Hand
programmer
values
Open the menu
1.3.6. Contrast
Allows you to adjust the LCD contrast to compensate for different lighting
conditions.
Values
Go to
the contrast, enter a higher value.
1.3.7. Language
Selects the language to be used on the LCD.
Hand
programmer
values

1.4. Statistics

1.4.1. Powered Hours
Number of hours the unit has been powered up since manufacture.
Open menu
1.4.2. Poweron Resets
The number of power cycles that have occurred since manufacture.
Open menu
1.4.3. Internal Temperature
The internal electronics temperature.
Value (view only)
Open menu
Page 76 SITRANS Probe LU (PROFIBUS PA) – INSTRUCTION MANUAL
, and select On or Off.
Range: to
Default:
English
German
French
Spanish
.
.
Degrees C
, and select the tab
Doc Id: VM11
Active Date: 15/12/2006
Off (enables programming)
On
(disables programming)
and enter the desired value. To increase
.
7ML19985JB02