Appendix; Consumables; Replacement Criteria; Replacing The Blade - Brother SDX325 Operation Manual

Chapter 7

APPENDIX

CONSUMABLES

Replacement Criteria

For the safe operation of this machine, replace the
following consumables according to the replacement
criteria. To purchase parts, contact the retailer who
sold you this machine or the nearest authorized
service center. For details on the optional
accessories, see "OPTIONAL ACCESSORIES" on
page 122.
Mat
• When the mat's adhesive strength decreases
• When there are many cutting traces in the mat
• When there is a deep cut from cutting in the mat
Cutting blade
• When the cuts in the material become rough,
reducing the quality of the finished product
• When the cutting edge becomes blunt
• When the blade is chipped (If the Cut Pressure
setting value is increased and you are still having
issues cutting evenly, the blade may be chipped
and will need to be replaced.)
High tack adhesive fabric support sheet
• When the sheet's adhesive strength decreases
• When fabric attached becomes twisted while being
cut
Scanning mat
• When the mat and cover sheet become dirty,
reducing the quality of the scan image
Erasable pen
• When the ink is dry and not marking the fabric
properly
• When the ink is used completely
Color pen
• When the ink is dry and not marking the paper or
material properly
• When the ink is used completely

Replacing the Blade

■ Removing
a
Twist off the holder cap to remove it.

For the rotary auto blade holder, proceed to step
c
.
b
Stick the blade straight into the rubber area on
the back of the included spatula.
a
a Rubber area
7
101