Retrieve Data - Brother SDX325 Operation Manual


When saving is finished, the following message
appears. For details on checking data saved in
CanvasWorkspace, refer to the Help for
CanvasWorkspace.
d
Touch the "OK" key to finish saving the data.

Retrieve Data

a
Touch the "Retrieve Data" key in the home
screen to display the retrieve source selection
screen.
b
To use the data from a USB flash drive, insert
the USB flash drive into the USB port (for a
USB flash drive) on this machine.
c
Touch where you saved the pattern to be
retrieved, and then select the pattern.
a
b
a Retrieve from machine's memory key
b Retrieve from USB flash drive key
c Retrieve from CanvasWorkspace key (via a
wireless network connection)
d Retrieve from CanvasWorkspace key (using
a USB cable)
a Retrieve from the machine's memory.

Touch the pattern to be retrieved and display.
b Retrieve from a USB flash drive.
• If there are folders on the USB flash drive, touch
a folder to display the list of patterns that it
contains.
• If there are many folders or patterns, touch the
arrows keys in the screen to scroll up or down.
Memo
• It may take some time for the USB flash drive to
be detected. Wait 5 to 6 seconds after inserting
the USB flash drive before pressing a key. (The
length of time differs depending on the USB
flash drive.)
• When using a USB flash drive with an access
indicator, wait until the indicator stops flashing.
• If an error is indicated, touch

Touch the pattern to be retrieved and display.
c
d
Memo
• When retrieving pattern data from the
machine's memory or a USB flash drive, the
size of the thumbnail previews can be changed.
Touch
then touch
again.
to display the settings screen, and
or to change the size.
3
65