Before Use; Placing The Machine; Removing The Packing Materials; Turning On/Off The Machine - Brother SDX325 Operation Manual

BEFORE USE

Placing the Machine

Open the front cover, and check that the entire cover
fits completely within the area of the desktop. When
using a cutting mat, since the mat travels back and
forth, make sure to keep enough space behind the
machine.
1
a 30 cm or more of open space

Removing the Packing Materials

Before turning on the machine, open the front tray
cover, and then remove all shipping tapes (in front
and back of the machine) and the cardboard shock-
absorbing material.
a
a Shipping tape
b Cardboard shock-absorbing material
Note
• If the packing materials were removed after the
machine was turned on, turn the machine off,
then on again. Continuing to use the machine
without restarting it may result in incorrect
operation.
8
b

Turning On/Off the Machine

a
Connect the power cord to the machine.
a Power cord
b
Plug the power cord into an electrical outlet.
c
Press in the operation panel.
When the opening screen appears, touch anywhere on
the display.

When the following message appears, touch the
"OK" key.
a