Brother SDX325 Operation Manual page 31

■ Loading the Mat
a
Attach the material that will be cut to the mat.
• For details on attaching material to the mat, see
"Attaching the Material to the Mat" on page 18.
b
While holding the mat level, gently insert it into
the feeding slot and press the
operation panel while gently pushing the mat
forward.
Insert the tip of the mat so that it aligns with the guides
on the left and right sides of the feed slot and is tucked
under the feed rollers. Insert the end of the mat marked
with an arrow into the machine.
b
a
a Guides
b Feed rollers

The mat is fed in to complete the preparations for
cutting.
Note
• Do not forcefully pull the mat while it is being
fed in. Otherwise, damage, for example, to the
feed rollers, may result.
28
■ Cutting
a
Select "Cut" in the test screen.
on the
b
a
b
Touch the "Start" key to start cutting.
Note
• To make half cuts (kiss cuts), turn on half cut
(kiss cut) in the settings screen. For details on
specifying the settings, see "Half Cut (Kiss Cut)
Settings" on page 30.

When cutting is finished, the message "Finished
cutting." appears on the display. Touch the "OK"
key to return to the test screen.