Using Drawing Functions To Fill Patterns/Make Outlines Thicker - Brother SDX325 Operation Manual

Using Drawing Functions to Fill
Patterns/Make Outlines Thicker
 Precautions for Using the Fill Function
Depending on the material and pen being used,
●
material drawn with a filled pattern may be
difficult to peel off or may tear. Perform test/trial
drawing with the pattern to be used in your
project.
An open pattern cannot be filled.
●
Example:
When fill settings are specified, the settings are
●
applied to all patterns in the pattern layout screen.
Fill and additional line settings cannot both be
●
specified for the same pattern.
■ Filling Patterns
a
Touch in the object editing screen.
Settings screen
a
b
c
d
a Fill
Select whether or not to fill patterns.
62
b Fill Pattern
c Fill Line Spacing
Adjust the spacing of the lines filling the pattern.
d Fill Direction
Adjust the direction of the fill pattern.
■ Making Pattern Outlines Thicker
Additional lines can be drawn to make pattern outlines
appear thicker.
a
Touch in the object editing screen to
display the outline settings screen.
Settings screen
Note
• The settings for "Number of Additional Line"
and "Additional Line Spacing" will not be
applied to patterns with fill settings applied.
a
b
c
a Additional Line
Select whether or not lines are to be added.
b Number of Additional Line
Specify the number of lines to be added.