Brother SDX325 Operation Manual page 62

c
Touch the "Object Edit" key in the mat editing
screen.
d
Touch .
The Seam Allowance screen appears. If
in gray, the seam allowance cannot be applied.
Memo
• Depending on the pattern, the seam allowance
may be applied as a default. Check the setting.

The pattern in the preview appears with a
drawing line (blue) and a cutting line (black).
e
Specify the seam allowance settings.
a Select whether or not to add a seam allowance.
b Specify the width (distance between the outline
and cutting line) of the seam allowance. Touch
or to change setting.
a
b
a Seam allowance line
b Pattern outline (stitching line)
c Seam allowance

Touch the "OK" key to finish specifying the
setting and return to the object editing screen.
f
Touch the "OK" key in the object editing
screen.
g
Touch the "OK" key to finish editing the
pattern.
appears
• To draw the seam allowance on the wrong side
a Right side of fabric
b Wrong side of fabric
c Drawing line (stitching line)
d Seam allowance line

a
b
a Wrong side of fabric
c
Memo
of the fabric, flip the pattern.
Image of Pattern Piece to be Created
a b
After attaching to the mat the fabric with the
wrong side facing up, load the mat into the
machine, flip the pattern, and then draw it and
cut it out.
a
3
c d
59