Configuring Audio - Huawei TE30 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Use an audio cable to connect an external speaker to the TE30 LINE OUT port.

5.3 Configuring Audio

Before using your TE30 to join a conference, set the audio parameters to gain the best possible
audio experience.
Procedure
Step 1 Choose Advanced Settings > Settings > Audio. Set the audio parameters by referring to
5-5
Table 5-5 Audio input parameters
Parameter
Built-in MIC 1
Built-in MIC 2
LINE IN 1
LINE IN 2
Gain
Volume
indicator
Microphone
array battery
level
Issue 01 (2013-03-27)
and Table 5-6.
Description
Specify whether to enable MIC or
LINE IN ports. If such a port is
disabled, your TE30 cannot receive
audio input from the device
connected to that port.
You can use this parameter to
specify audio sources for the left
and right audio channels in stereo
mode.
MIC 1 and LINE IN 1 ports are used
for the left audio channel input
source, and MIC 2 and LINE IN 2
are used for the right audio channel
input source.
Adjusts the volume for the MIC 1,
MIC 2, LINE IN 1, and LINE IN 2
ports.
Displays volume in real time.
Displays the microphone array
battery level in real time.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Microphone and Speaker
Setting
These parameters are selected by
default.
Value range: -12 dB to +12 dB
The default value is +0dB.
No default value is set for this
parameter.
No default value is set for this
parameter.
Table
41