Powering On And Off - Huawei TE30 User Manual

HUAWEI TE30 Videoconferencing Endpoint
User Guide
l
l
l
If the monitor does not provide an HDMI input port, use either of the following methods:
l
l

2.3 Powering On and Off

With all cables connected to the TE30, power it on.
Before powering on your TE30, ensure that:
l
l
l
l When your TE30 is powered on, ensure that the power cable is securely connected to the
l Before isolating your TE30 from any external power supplies (for example, the power supply
Issue 01 (2013-03-27)
(Optional) Presentation output: Use a VGA cable to connect the TE30 VGA OUT port to
a projector VGA out port.
LAN connection: Use the provided network cable to connect the LAN connector of the
integrated cable to the network port of a network device.
Power supply: Use the provided power cable and power adapter to connect the integrated
cable power connector to the power socket.
NOTE
l The HDMI conversion cable is used to extend an HDMI cable. Connect one end of the HDMI
conversion cable to the HDMI connector of the integrated cable, and connect the other end to an HDMI
cable. Then connect the HDMI cable to the monitor HDMI input port.
l The integrated cable and the HDMI conversion cable are provided with your TE30. You need to
purchase other cables by yourself.
l The 10 m proprietary cable is provided as standard with the VPM220, and the integrated cable is
provided as standard with the TE30.
When the monitor provides a DVI input port, use an HDMI-DVI cable to connect the HDMI
connector of the integrated cable to the monitor DVI input port. Press and hold
remote control for 5 seconds. Choose Advanced Settings > Settings > Video > Video
Output, select MAIN OUT HD, and select DVI for Output mode.
When the monitor provides a VGA input port, use a VGA cable to connect the TE30 VGA
OUT port to the monitor VGA input port and perform the following:
– Press and hold
Settings > Video > Common Settings, select Video Output, and select VGA OUT
for GUI, Caption output, and Main output interface.
– Press and hold
Settings > Video > Video Output, select MAIN OUT HD, and select VGA for Output
mode.
The power cable and power adapter are correctly connected to the related devices.
The AC power supply voltage is at 50 Hz or 60 Hz within the 100-240 V range.
The sequence of and voltage difference between the live wire, neutral wire, and ground
cable comply with international standards. The ground cable is properly grounded.
CAUTION
TE30 to prevent power disconnection.
from a power socket) and removing the power cable, power off the TE30 properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
on the remote control for 5 seconds. Choose Advanced Settings >
on the remote control for 5 seconds. Choose Advanced Settings >
2 Installation and Initial Configuration
on the
5