Huawei TE30 User Manual page 57

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
Enable H.239
H.239 video
protocol
H.239 video
resolution
Presentation
resolution
H.239 video
bandwidth type
H.239 video
bandwidth(%)
Presentation
plug-and-share
Issue 01 (2013-03-27)
Description
Specifies whether you can share
presentations during conferences.
NOTE
After you select this parameter, the
following parameters are available: H.
239 video protocol, H.239 video
bandwidth type, H.239 video
resolution, H.239 video bandwidth
(%), and Presentation plug-and-
share
Specifies the video protocol your
TE30 uses to encode presentations.
l If you select Auto, you must
also set Presentation
resolution.
l If you do not select Auto, you
must set H.239 video
resolution.
Specifies the presentation format.
The available options vary
depending on the H.239 video
protocol value.
Specifies the presentation video
resolution.
l Smooth: Your TE30 uses a high
frame rate to ensure smooth
video.
l Sharp: Your TE30 uses a high
video resolution to ensure sharp
video.
Specifies the mode for setting the
presentation video bandwidth.
l Auto: Your TE30 automatically
sets the presentation video
bandwidth based on the
bandwidth available.
l Manual: You must manually set
H.239 video bandwidth(%).
Specifies the percentage of call
bandwidth that presentations can
occupy.
Specifies whether your site
automatically shares presentations
with remote sites once presentation
input is detected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Setting
This parameter is selected by
default.
The default value is Auto.
The default value is Auto.
The default value is Sharp.
The default value is Auto.
The default value is 50.
The default value is Disable.
6 Conference
49