Huawei TE30 User Manual page 68

HUAWEI TE30 Videoconferencing Endpoint
User Guide
Parameter
URI
Country/Region
code
Area code
Line 1 #1
Line 1 #2
Line 2 #1
Line 2 #2
Line 3 #1
Line 3 #2
Step 5 Select Save.
The new site is listed in Address Book.
----End
Creating a Group
If certain sites regularly join the same conference, you can define these sites as a group.
Step 1 On the Address Book screen, select All Groups.
Issue 01 (2013-03-27)
Description
Specifies the uniform resource
identifier (URI) of the site, for
example, abcd@huawei.com.
NOTE
This parameter available only when
Type is set to IP, H.323, or SIP.
Specifies the country or area where
your TE30 is located.
This parameter is mandatory when
Type is set to ISDN or PSTN.
Specifies the area code for the site.
Set this parameter based on the
Country/Region code value.
This parameter is mandatory when
Type is set to ISDN or PSTN.
Specify the numbers your TE30
uses to call the site. These
parameters are available only for
ISDN sites. You can set two
numbers for each BRI line.
l When the ISDN site rate is set to
a value ranging from 64 kbit/s to
512 kbit/s, set Line 1 #1 only
because you only need to dial
that number to call the site.
l If the ISDN site rate is set to 2,
3, 4, 5, or 6 x 64 kbit/s, set the
other required parameters as
well because you need to dial the
BRI line numbers one by one to
call the site. Line 1 #2 specifies
the second number of the first
BRI line.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Conference
Setting
No default value is set for this
parameter.
No default value is set for this
parameter.
No default value is set for this
parameter.
No default value is set for these
parameters.
60