Tiller Handle (Tiller Handle Model); Assembling The Tiller Handle - Yamaha F30B 2018 Service Manual

Assembling the tiller handle

1. Assemble:
• Tiller handle
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Pass the throttle shaft "1" through the fric-
tion piece "2" and tiller handle "3".
b. Install the bushing "4", retainers "5", and
spring "6".
2
1
3
c. Install the collar "1", the washers "2", the
plate "3", and a new cotter pin "4".
2
1
3
d. Install the neutral switch "1", and then fas-
ten it using the new plastic ties "2".
e. Install the throttle arm "3" and bushing "4".
4
6
5
5
1 2 3 2
4
2
3
2
2
f. Align the marks "a" and "b", and align the
cutouts "c" and "d", and then install the
control link assembly "1".
TIP:
Route the neutral switch lead under the control
link assembly "1". See "Tiller handle (tiller han-
dle model)" (5-11).
4
g. Install the nut "1", the throttle friction ad-
juster "2", and a new cotter pin "3".
9-5

Tiller handle (tiller handle model)

4
1
2
c
d
1
3
1
2
3
a
b