Lifting Outboard Motors; Handling Of Gas Torch; Parts, Lubricants, And Sealants; Handling Of Lubricants And Sealants - Yamaha F30B 2018 Service Manual

• Protect your hands and feet by wearing pro-
tective gloves and safety shoes when neces-
sary.

Lifting outboard motors

• Outboard motors weighing 18 kg (40 lb) and
over must be carried by a crane or equiva-
lent.
• Use a wire cable lifting harness of adequate
strength to lift up the outboard motor in a sta-
ble manner.
• Lift and suspend the outboard motor in a sta-
ble manner using the designated lifting at-
tachment points.
• Do not work on or under an outboard motor
while it is suspended from a lifting device. Se-
curely mount the motor on a suitable work
stand or place it on a stable work surface as
soon as possible.

Handling of gas torch

• Improper handling of a gas torch may result
in burns. For information on the proper han-
dling of the gas torch, see the operation man-
ual issued by the manufacturer.
• When using a gas torch, keep it away from
gasoline and oil to prevent a fire.
• Components become hot enough to cause
burns. Do not touch any hot components di-
rectly.
Important safety and service information

Parts, lubricants, and sealants

Use only genuine Yamaha parts, lubricants,
and sealants, or those recommended by Ya-
maha, when servicing or repairing the out-
board motor. Failures caused by the use of
parts, lubricants, or sealants that are not equiv-
alent in design and quality to genuine Yamaha
parts, lubricants, or sealants will not be cov-
ered by warranty.

Handling of lubricants and sealants

• Follow all instructions and safety precautions
provided on the product label and the materi-
al safety data sheet (MSDS/SDS) for lubri-
cants, sealants, and other shop chemicals.
• Wear impervious gloves, eye protection, or
other protective apparel when required.
• Wash skin thoroughly after contact with lubri-
cants, sealants, and other shop chemicals,
and change clothing if contaminated with
them.
0-5