Uncrating
Uncrating procedure
Wear gloves to avoid injury from sharp
steel edges while uncrating.
1. Uncrate:
• Outboard motor
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Check the crate for shipping damage. If
any damage is found, consult your Yama-
ha agency.
b. Cut the strap, and then remove the top
cover.
c. Remove all of the bolts from the bottom
plate, and then remove the frame.
Be careful not to damage the outboard mo-
tor.
d. Remove the wrapping, and then check the
outboard motor for concealed damage. If
any damage is found, consult your Yama-
ha agency.
e. Remove the top cowling.
f.
Remove the bolt "1", and then remove the
flywheel magneto cover "2".
2
1
g. Install the shackles "1" to the engine hang-
ers "2", and then install the lifting harness-
es "3" to the shackles "1".
3
1
h. Apply tension to the lifting harnesses "1".
TIP:
Place a rag "2" between the flywheel magneto,
lifting harness, and shackle.
1
2
3-3
Uncrating
1
3
2
2