Capacity Control Details Setting - Hitachi ECO COMPACT PC-ARC-E Installation & Operation Manual

Set Value
Run Indicator is deactivated
00
Run Indicator is activated (default
01
3 Press " " to save the setting. Once done, the item number starts flashing again.
4 Press " " (On/Off) once, or press " " for 3 seconds to return to the home screen.

NOTE
This process is only valid when the item number is blinking.

7.3.2 Capacity Control Details Setting

This function is used to set "Capacity Control Level", e.g. the intensity level of the power saving
function.

NOTE
• This function cannot be set when the indoor unit and outdoor unit do not support this function.
• Refer to "Power Saving On/Off".
1 Enter "Capacity Control Details Setting" by selecting "02" as the item number.
to switch the set value "00 ↔01↔02" to set the "Capacity Control Level".
2 Press
" " or " "
Set Value
Capacity Control Level is Low
00
Capacity Control Level is Med
01
Capacity Control Level is High
02
3 Press " " to save the setting and the item number "02" starts to flash.
4 Press " " (On/Off) once, or press " " for 3 seconds to return to the home screen.
PMEN0630 rev.0 - 07/2022
Description
setting)
Description
Set Value
Item No.
7
Set Value
Item No.
Icon
20