Table of Contents
Advertisement
Touch key and buzzer check
The No. in area Ⓐ is 05.
1 Press each key once a time in the sequence as follows:
"
2 The No. in area Ⓑ increases by 1 with each switch pressing.
NOTE
• The number increases regardless of the order of the switch pressing. The switch pressing is not
counted if 2 or more switches are pressed simultaneously.
• When press the button, the buzzer sounds.
• If this step check is normal, the screen will go to next check automatically.
Transmission check
The No. in area Ⓐ is 06.
The wired remote controller then automatically starts communication circuit checking.
✓ If the communication circuit check is abnormal, "FF" will be displayed at area Ⓑ and this
status normally stays for 5 seconds.
✓ If this step check is normal, the screen will go to next check automatically.
PMEN0630 rev.0 - 07/2022
" " " "
No. in area Ⓑ
Abnormal result indicated in area Ⓑ
"
"
No. in area Ⓐ
No. in area Ⓐ
"
73
10
Advertisement
Table of Contents
