Table of Contents
Advertisement
10.2.4 Reset Wired Remote Controller
To delete the settings of Wired Remote Controller or re-connect the controller to the unit, follow
the below steps to reset the controller.
NOTE
It is not possible to delete only part of the record data by resetting.
1 Press " ",
" " or " "
screen, under the condition of "Operation Stop" state.
2 Press " " or " " simultaneously for 3 seconds again, Wired Remote Controller starts EEPROM
clear process.
The No. in area Ⓐ is 13.
3 After EEPROM is cleared, the screen automatically changes and Wired Remote Controller
restarts.
PMEN0630 rev.0 - 07/2022
simultaneously for 3 seconds when Wired Remote Controller is at home
No. in area Ⓐ
10
77
Advertisement
Table of Contents
