Setting Initialization - Hitachi ECO COMPACT PC-ARC-E Installation & Operation Manual

10.1.2 Setting Initialization

This function is used to restore the factory default settings of Function Selection and Input/
Output.

NOTE
• The history display on the "Function Selection" screen is also updated to the factory default
setting.
• If the indoor unit that does not support Setting Initialization is selected, the factory default
settings of Function Selection and Input/Output is not available.
• Even if "All indoor units" are selected, the settings of Function Selection and Input/Output for
the indoor unit that does not support Setting Initialization cannot be initialized to the factory
default settings.
1 Press " " and " " simultaneously for 3 seconds.

NOTE
• Use this function only when setting restored to the factory default settings causes no problem
and inconvenience.
• For the indoor units without setting initialization function, this operation is invalid.
2 Indoor unit selecting screen is displayed if multiple indoor units are connected.
✓ If there is only one indoor unit connected to the wired remote controller, this screen is not
displayed and the screen in step3 is shown.
PMEN0630 rev.0 - 07/2022
Index No.
FF: Select all
indoor units.
10
61