Setting Initialization - Hitachi PC-ARFG-E Installation & Operation Manual

SERVICE & INSTALLATION MENU

6.1.11 Setting Initialization

This function is used to restore the factory default settings of
Function Selection and Input/Output.
?
N O T E
• The history display on the "Function Selection" screen is also updated
to the factory default setting.
• If the indoor unit that does not support Setting Initialization is selected,
"No Function" is displayed.
• Even if "All" is selected, the settings of Function Selection and Input/
Output for the indoor unit that does not support Setting Initialization
cannot be initialized to the factory default settings.
1 Select "Setting Initialization"on the "Installation Menu" screen
and press "OK".
Installation Menu
Setting Initialization
Main Remote Setting
Priority Setting
Cancel Preheating Control
Elevating Grille Setting
OK Select
2 Press " ", " ", " " or " " to select the indoor unit. Press "OK".
If there is only one indoor unit connected to the wired remote
controller, this screen is not displayed. (The screen in Step 3
is shown.)
Setting Initialization
00-00
00-01
00-02
Select
OK
3 Select "Yes" on the confirmation screen and press "OK". Wait
for approximately 30 seconds.
Setting Initialization Setting Initialization
00-00 00-00
Restore factory default settings for
function selection and input/output:
00-01 00-01
00-02 00-02
Yes
Select
OK
64 PMML0565 rev.0 - 09/2021
(Mon) 16:30
Back
ALL
Back
ALL ALL
00-00
Cancel
Back
?
N O T E
Use this function only when setting restored to the factory default settings
causes no problem and inconvenience.
4 Select "Complete" and press "OK". To initialize another
setting of Function Selection and Input/Output, select
"Continue" and press "OK" to return to Step2.
Setting Initialization Setting Initialization
00-00 00-00
Completed
00-01 00-01
00-02 00-02
Continuous
Select
OK
ALL ALL
Complete