Autoboost Setting - Hitachi PC-ARFG-E Installation & Operation Manual

FUNCTION MENU
Power Consumption
[dd] kWh
100
50
0 2 4 6 8 10 12 14 16 18 20 22
1day before
OK List T T oday Adjust

5.7 AUTOBOOST SETTING

The function is used to increase the cooling and heating
capacity in 30 minutes once the operation starts.
This function is only available when the operation mode is COOL
or HEAT.
The unit starts each time in quick mode until the setting is
canceled.
?
N O T E
• Autoboost cannot be set when the outdoor unit does not support this
function.
• Autoboost cannot be used if Power Savings is not supported.
• When quick function is activated while mode is "Cool", fan speed
changes and is locked as "Auto" for 30 minutes at the longest
regardless of the current setting. While in this operation (fan
speed "Auto"), fan level may drop as low as "Low" when the room
temperature gets close to the setting temperature. The operation
starts regardless of the fan speed.
Set the autoboost
1 Select "Autoboost" on the "Function Menu" screen and press
"OK".
Function Menu
Power Consumption Display
Autoboost
Comfort Setting
Motion Sensor Setting
Setback Setting
OK Enter
20 PMML0565 rev.0 - 09/2021
(Mon) 16:30
2day before
Back
(Mon) 16:30
Back
Power Consumption
[dd] kWh
Period
0 ~ 2
2 ~ 4
4 ~ 6
6 ~ 8
8 ~ 10
OK
Graph
2 Press " " or " " the selected items changes as follows:
"Not Set" ↔ "COOL" ↔ "HEAT" ↔ "Cool + Heat".
Select the Autoboost mode and press "OK" to confirm the
settings.
Press " " to return to the "Function Menu" screen.
Autoboost
Not Set
Cool
Heat
Cool + Heat
OK Select
(Mon) 16:30
1d bef 2d bef
0.0 25.5
0.0 10.1
20.5 0.0
10.2 0.5
8.5 5.2
Back
Back