Reset The Setting; Power Savings Setting - Hitachi PC-ARFG-E Installation & Operation Manual

FUNCTION MENU

5.2.4 Reset the setting

1 Select "Operation Schedule" on the "Function Menu" screen
and press "OK".
• If the current time is not set, the "Adjusting Date/Time"
setting screen is displayed.
• If no schedule or holiday has been set, Step3 is displayed.
Simple Timer
Operation Schedule

Power Savings Setting

Night Quiet Operation
Power Saving/Night Quiet Schedule
Enter
OK
2 Press " " or " " to select "Reset All" and then press "OK".
0 0 6 6 12 12 18 18
Mon Mon
F
Tue Tue
Wed Wed
Thu Thu Holiday Holiday
N
Fri Fri
Sat Sat
e
Sun Sun
OK Select
5.3 POWER SAVINGS SETTING
No. Item
Capacity Control

Rotation Control

Intermittent

Control
No Setting

Function Menu
Operation Schedule
Reset All Schedule Settings
Dec 23
Dec 16 -
M T W T F S S
16 17 18 1920 21 22
Reset All R R R es es ese e e t All
Description
Suppress the heating and cooling capacity
of the indoor unit.
Set control mode and power savings level
with its corresponding value.
Interlock with indoor units of the same
outdoor unit system and switch to FAN
operation in sequence.
Set control mode and fan mode time.
Cooling/heating mode and fan mode are
repeated at regular intervals.
Set power savings level.
Power savings operation is not performed.
13 PMML0565 rev.0 - 09/2021
3 Select "Yes" by pressing " " or " "and then press "OK".
All schedule and holiday settings are reset and the screen
returns to the Step3 of
(Mon) 16:30
Back
(Mon) 16:30
t All t All
Back
?
N O T E
• The power savings mode that can be switched differs depending on
the type of the outdoor unit or indoor unit.
• The power savings modes that can be switched according to the
"Main / Sub" display are as follows.
- Main — the power savings mode can be switched from  to .
- Sub — the power savings mode cannot be switched. The power
savings mode of the sub synchronizes with that of the main
remote controller of the same outdoor unit system.
• When the power savings mode is "Indoor rotation control", the power
savings level cannot be changed.
• When the power savings mode is "No Setting", the power savings ON
/ OFF and power savings level cannot be changed.
• When the power savings mode is "Outdoor capacity control" and
sub, the power savings ON / OFF and power savings level cannot
be changed.
• When the power savings mode is switched, power savings ON / OFF
is set to OFF.
• When using the power savings function, the cooling and heating
capacity may decrease.
• Detailed settings can be changed from the power saving details
setting.
"5.2.1 Schedule Day and Time Setting"
.