Reset Controller Setting; In Alarm Condition - Hitachi PC-ARFG-E Installation & Operation Manual

IN ALARM CONDITION

2 Press " " or " " to select the timer setting and press "OK".
• Press and hold " " or " " to increase or decrease
continueously.

9.3 RESET CONTROLLER SETTING

1 Press " " or " " to select "Reset Controller Setting" in the
"Menu" screen and press "OK".
Screen Display Setting
Reset Controller Setting
More Settings
Contact Information
Fan Speed Louver Language Off Timer
10 IN ALARM CONDITION
• The RUN indicator flashes.
• The indoor unit number, alarm code, model code, and the connected number of indoor units are displayed on the screen.
• If two or more indoor units are connected, the above functions for each indoor unit are displayed one-by-one.
98 PMML0565 rev.0 - 09/2021
Menu
( Mon ) 16:30
Menu
Indoor unit number
(Refrigerant system-address number)
Installed unit number
• The timer can be set from 0.5 to 23 hours.
• Press " " to increase 30 minutes of each step for 0.5 to 9.5
hours, 1 hour of each step for 10 to 23 hours.
2 Press " " or " " to select "Reset" and press "OK", return to
"Menu" screen. The default settings are as table below .
Off Timer
Language
Unit
Not Set
English
°F
When more than one indoor
unit is connected, press "
" or " " to show other indoor
units.