Service & Installation Menu - Hitachi PC-ARFG-E Installation & Operation Manual

SERVICE & INSTALLATION MENU
6 SERVICE & INSTALLATION MENU
1 Turn ON the power supply for all the indoor units.
For models equipped with an auto-address function, wait
approximately 3 minutes.
This function is being automatically performed. (There is
a built-in 5 minute requirement according to the setting
condition.)
2 While the air conditioner is OFF, press " " to select "Menu"
and press "OK".
3 While the air conditioner is ON, press " " to select "Menu"
and display the Menu screen.
Conference Room
A/C
26
MAIN
26
.
0
Temp Cool Fan Speed
4 Select "Service & Installation" and press "OK".
37 PMML0565 rev.0 - 09/2021
. 0
Louver Menu
5 Input password by pressing " ", " ", " ", or " ", select "
Then press "OK".
Password is required to prevent unintentional operations.
The default user password is "0000".
Function Menu
Enter Password
Screen Display Setting
Service & Installation
6 0
Cool Fan Speed
OK Confirm
Service & Installation Menu screen is displayed.
6 If Password Input Effective Time is set, the password is
canceled and inputting password is not needed during the set
period. See
"6.2.2 Password Setting"
Service & Installation
Service Menu
Installation Menu
Check Menu
OK Enter
Menu
0 0
OK
Louver Menu Help
Back
for password settings.
(Mon) 16:30
Back
OK
".