Table of Contents
Advertisement
NOTE
• The IR receiver function can only be used on the home screen.
• The wired remote controller does not support "Differentiate Indoor Units Set Close Together" at
the wireless remote controller.
• The wired remote controller does not support "Test Run" at the wireless remote controller.
• When the wireless remote controller is in OFF status, even if the Operation Mode, Fan Speed, or
Temperature Setting is changed on the wireless remote controller, the settings on the compact
remote controller will not be changed because no signal is sent.
7.9 Filter Reminder Reset Setting
This function is used to turn off the filter reminder indication and to reset the time of use for the
filter.
The "
" icon will be displayed on the home screen when the time of use for the air filter has
been elapsed.
1 Clean the air filter according to the indoor unit.
2 Press " " for 3 seconds to reset the filter reminder time.
After Filter Reminder Reset is completed, "
PMEN0630 rev.0 - 07/2022
" icon will disappear from the home screen.
7
30
Advertisement
Table of Contents
