(9) Peel the dark-blue film off the sheet.
(10) Attach the sheet to the parts-mounted surface of the HDD.
CAUTIONS
• Do not attach the light-blue film face of the sheet to the parts-mounted surface of the
HDD. Also ensure that the sheet does not come atop any of the bumps of the HDD. If it
is attached to the parts-mounted surface, a short-circuit may occur.
• Do not attach the sheet retaining plate used for 850Y0112 to a new HDD. For
850Y0117, the sheet retaining plate is not used.
(9)
Dark-blue film
(11) Install the HDD.
"I Installation procedure"
(12) Make adjustment after replacement.
"I Check/adjustment procedure"
009-058-03
08.30.2002 FM3476
(10)
Sheet
CR-IR347 Service Manual
Light-blue film face
Parts-mounted surface
Bump (x4)
HDD
T
O
P
FR7H3456.EPS
MC - 369
MC - 369