Siemens FUJI-Reader CR-IR347 Service Manual page 421

I Removing and Installing the Memory board (MMA90A/MMB90A)
G Removal procedure
(1) Remove the following cover:
• Upper left-hand side cover
"3. Removing and Installing the Covers"
(2) Remove a memory board.
N NOTE N
To remove a memory board, perform the steps indicated below. If you do not follow these
steps, the connector claws become damaged.
(1) Push the connector's left-hand claw open.
(2) Open the memory board to an angle of about 30 ° to 40 ° .
(3) Pull out the memory board.
Top view
Left-hand
claw
MMA90A board/
MMB90A board
009-058-03
08.30.2002 FM3476
(1)
Connector
MTH08C board
CR-IR347 Service Manual
(2)
30 – 40
MMB90A board
MMA90A board
MC - 394
(3)
FR7H3803.EPS
FR7H3804.EPS
MC - 394