Product overview
3.9 FUNCT button
3.9
FUNCT button
You can use the FUNCT button to select and initiate module functions.
①
②
Figure 3-13 FUNCT button
The following functions are available via the FUNCT button:
• Function 1: Save service data on SIMATIC Memory Card
• Function 2: Switching the SIMATIC Memory Card from program card to firmware update
card and performing a firmware update
• Function 3: Switching the SIMATIC Memory Card from firmware update card to program
card
Functions 1 to 3 are selected via the FUNCT key. The selection is shown on the 7-segment
display. You can only select functions after the CPU has started up.
Exception: The service data is saved to the SIMATIC Memory Card during startup of the
SIMATIC Drive Controller using the FUNCT button.
42
FUNCT button
7-segment display
SIMATIC Drive Controller
Equipment Manual, 11/2022, A5E46600370-AC