View Of Simatic Drive Controller Without Covers - Siemens SIMATIC S7-1500 Equipment Manual

3.7.2

View of SIMATIC Drive Controller without covers

The figure below shows the operator controls and interfaces on the front of the SIMATIC
Drive Controller.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭
⑮
⑯
Figure 3-5 SIMATIC Drive Controller display and operator controls as well as interfaces
SIMATIC Drive Controller
Equipment Manual, 11/2022, A5E46600370-AC
X122, X132: 12 DI + 8 DI/DQ (assigned to SINAMICS Integrated)
X142: 8 DI/DQ (assigned to CPU)
PROFINET IO IRT (X150), with 3 ports: P1R, P2R, P3
PROFINET IO RT (X160), with 1 port (P1)
Basic PROFINET services (X130), with 1 port (P1), 1000 Mbps
Interfaces board (X150, X160 and X130)
LED displays
7-segment display, for service and diagnostics purposes
X50: Slot for SIMATIC Memory Card
Mode selector, see section Mode selector (Page 40)
X125, X135: 2 × USB 3.0 interface (no function, no connection permitted)
Protective conductor connection M5, Torx T25, tightening torque 3 Nm (26.6 lbf in)
FUNCT button for service and diagnostics purposes, see section FUNCT button (Page 41)
ACT LED: Display for access to SIMATIC Memory Card
X126: PROFIBUS DP interface
X124: Connection for the 24 V DC supply voltage
3.7 Operator controls, displays and connection elements
Product overview
33