Philips Smart-hopping 2.0 Installation Manual page 37

Fixed Mounting the Smart-hopping Access Point to a Wall (With Cosmetic Cover)
2
3
4
Smart-hopping 2.0 Access Point 1.4 GHz Installation Guide
Tap a supplied plastic screw anchor
into each pilot hole until it is flush with
the wall surface.
Place the mounting bracket against the
wall and line up the two holes.
Screw a supplied #6 x 1 1/4 inch self-
tapping screw through each hole in the
mounting bracket and into each screw
anchor (or pilot hole).
DRAFT - 03 JUN 2022 13:32
2-9