Table of Contents
Advertisement
Chapter 2: Mount and Install the Smart-hopping 2.0 Access Point 1.4 GHz
Flush Ceiling Mount (with Cosmetic Ring)
You can mount the Smart-hopping Access Point on a ceiling tile and make the Access
Point flush with the tile (the Access Point protrudes 7-10 mm from the finished side of the
ceiling tile).
To mount the Smart-hopping 2.0 Access Point 1.4 GHz and cosmetic ring to a ceiling tile:
Note Wall anchors and #6 1.25-inch self-tapping screws are included with the Access Point.
These are not used in this mounting method.
:
2-12
Table 2-5: Required Flush Mounting with Cosmetic Ring Material
Illustration
867216 Access Point Kit -includes the following:
Access Point Mounting Kit IM2 - includes the following:
DRAFT - 03 JUN 2022 13:32
Required Parts
Part Name
Access Point
Mounting Bracket
Mounting Rail
M6 Push Nut
M6 x 1 Nut
Quantity
1
1
1
1
1
2
2
Advertisement
Table of Contents
