Table of Contents
Advertisement
Chapter 1: Overview
Specifications
Specification
Physical:
Chassis (only) Dimensions (H x W x L)
Weight with Internal Antennas
Mounting
Environmental:
Operating Temperature
Storage Temperature
Humidity Range (Operating)
Humidity Range (Storage)
Altitude
Electrical:
Power (Input)
Power Sensing
Power (Output)
LED Indicators
Smart-hopping Radio
Smart-hopping Antenna Frequency Range
Antenna Type
RF Diversity
Frequency Diversity
Compatibility Mode (6 channel mode):
Channel spacing
Modulation
Power output
Antenna gain
Time slot types supported
Total time slots available
1-10
Table 1-3: Smart-hopping 2.0 Access Point 1.4 GHz Specifications
30 mm x 163 mm x 163 mm (1.2 in x 6.38 in x 6.38 in)
320 g (0.71 lb)
Flush Mount with Ceiling tile (includes Cosmetic Ring, Below Ceiling, Below
Ceiling with Cosmetic Cover, Wall Mount, or Wall Mount with Cosmetic Cover
0 to +55
-40 to +60
< 95% RH @ 40
< 90% RH @ 60
Operating and Storage up to 3,048 m (10,000 ft)
48 VDC nominal (37-57 VDC)
8 watts, 287 mA (Access Point)
Auto-sensing PoE, compliant with 802.3af and 802.3at (Type 1)
5 VDC @ 50 mA at Remote Antenna RJ-45 connectors
Four LEDs for:
• Power/Sync
• Network
• Radio Activity
• Future use
1395-1400 MHz + 1427-1432 MHz
WMTS - Wireless Medical Telemetry Service (USA)
Smart-hopping dual internal antennas
Uses two antennas and selects the antenna with the best signal.
Dynamic, selects RF channels for best signals.
1.6 MHz
GFSK
12.5 (±1.5) dBm (12.6 mW to 25 mW) into Antenna Load (2:1 VSWR
maximum)
2 dBi
Single or double/long
32
DRAFT - 03 JUN 2022 13:32
o
o
C (32 to 131
F)
o
o
C (-40 to 140
F)
o
C non-condensing
o
C
Value
Advertisement
Table of Contents
