Glossary - Panasonic WUME-SF4D-2 Instruction Manual

Glossary

7-1 Glossary
Machinery Directive
EMC Directive
EN 61496-1
IEC 61496-1/2
ANSI/UL 61496-1/2
JIS B 9704-1/2
IEC 61508-1 to 7
JIS C 0508-1 to 7
EN 55011
EN ISO 13849-1
EN 13849-1
JIS B 9705-1
ESPE
Control output (OSSD)
FSD
Test rod
Lockout
168
This directive applies to assemblies of linked parts or components
powered by electricity, compressed air, oil pressure, or other means,
consisting of at least one component which moves and a compo-
nent which fulfills a safety function, and which is sold in the market
as a single unit.
This directives applies to electric or electronic devices which may
create electromagnetic interference, or whose performance may be
affected by electromagnetic interference.
Standards that pertain to machine safety, especially electrosensi-
tive protective equipment (ESPE).
EN 61496-1, IEC 61496-1, ANSI/UL 61496-1 and JIS B 9704-1 give
general rules for failure mode and effect analysis, EMC require-
ments, and other matters. IEC 61496-2, ANSI/UL 61496-2 and JIS
B 9704-2 specify effective aperture angles and protection against
extraneous light sources for Active Opto-electronic Protective De-
vices (AOPDs).
Standards that pertain to general functional safety for electrical,
electronic, and programmable electronic devices.
These standards prescribe methods, safety integrity levels (SIL),
and other specifications that reduce risk to a tolerable level of prob-
ability.
Specifies the allowable levels and measurement methods for ra-
dio interference characteristics of industrial, scientific and medical
(ISM) radio-frequency equipment.
Standards for safety-related matters of machine safety / control sys-
tems.
These standards specify levels (categories) of structure and fault
detection reliability, and levels of safety function performance capa-
bility (PL: Performance Level).
Abbreviation for Electro-Sensitive Protective Equipment.
Abbreviation for Output Signal Switching Device.
A component of the light curtain that turns OFF when light of the
light curtain is blocked.
Abbreviation for Final Switching Device.
This is a component of the machine's control system that breaks the
MPCE circuit when the OSSD outputs an OFF signal due to the light
from the light curtain being blocked.
Rod for checking the detection capability of the device.
The size of the rod is equivalent to the minimum sensing object.
One of the safety states of the device. Operation stops when the
self-diagnosis function determines that an irrecoverable failure (OS-
SDs not operating normally, etc.) has occurred. When the emitter is
in the lockout state, the OSSD and SSD of the receiver turn OFF.
When the receiver is in the lockout state, the OSSD and SSD turn
OFF.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016