Huawei FusionDC1000A Commissioning Manual page 24

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)
Do not expose batteries at high temperatures or around heat sources, such as
high-temperature sunlight, fire sources, transformers, and heaters. Battery
overheating may cause leakage, smoke, flammable gas release, thermal runaway,
fire, or explosion.
Protect batteries from mechanical vibration, falling, collision, punctures, and
strong impact. Otherwise, the batteries may be damaged or catch fire.
To avoid leakage, smoke, flammable gas release, thermal runaway, fire, or
explosion, do not disassemble, alter, or damage batteries, for example, insert
sundries into batteries, squeeze batteries, or immerse batteries in water or other
liquids.
There is a risk of fire or explosion if the model of the battery in use or used for
replacement is incorrect. Use a battery of the model recommended by the
manufacturer.
Battery electrolyte is toxic and volatile. Do not get contact with leaked liquids or
inhale gases in the case of battery leakage or abnormal odor. In such cases, stay
away from the battery and contact professionals immediately. Professionals must
wear safety goggles, rubber gloves, gas masks, and protective clothing, power off
the equipment, remove the battery, and contact technical engineers.
A battery is an enclosed system and will not release any gases under normal
operations. If a battery is improperly treated, for example, burnt, punctured,
squeezed, struck by a lightning, overcharged, or subject to other adverse
conditions that may cause battery thermal runaway, the battery may be damaged
or an abnormal chemical reaction may occur inside the battery, resulting in
electrolyte leakage or production of gases such as CO and H
device corrosion, ensure that flammable gas is properly exhausted.
Issue 02 (2022-12-15)
D ANGER
D ANGER
D ANGER
D ANGER
D ANGER
D ANGER
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
. To prevent fire or
2
18