Setting The Transparent Transmission Function For The Ecc800-Pro Collector - Huawei FusionDC1000A Commissioning Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Commissioning Guide (IT Scenario)
Table 4-12 Setting an authentication password
Path
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Step 5 Click Submit.
----End
4.7.3.2 Setting the Transparent Transmission Function for the ECC800-Pro
Collector
Context
●
●
●
Procedure
Step 1 Log in to the ECC800-Pro WebUI as an administrator.
Step 2 Choose System Settings > NMS Application > Transparent Transmission
Channel.
Step 3 Set COM2(Port:3212) to Enable and click Submit.
Mapping relationship: COM1 corresponds to port 3211, COM2 port 3212, COM3 port 3213, and
COM4 port 3214.
●
Issue 02 (2022-12-15)
Parameter
Authenticatio
n password
Confirm
authenticatio
n password
Using the transparent transmission function, the NMS can directly manage
southbound components that are not monitored by the ECC800-Pro.
A device connected to the COM port on the ECC800-Pro or UIM20A expansion
module can be connected to the NetEco using the transparent transmission
function.
In this example, the COM2 port of the ECC800-Pro is used for transparent
transmission.
NO TE
If the port is set for the first time, you are prompted to set an authentication
password. On the Set Authentication Password tab page, set
Authentication password and Confirm authentication password and click
Submit.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Commissioning Core Devices
Default Setting
Value
Modifyme Set this parameter based on
_123 customer requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,./?-`
$'(8-32 characters that include at least
three of the following types: lowercase
letters, uppercase letters, digits, and
special characters)
- -
62