Huawei LUNA2000-2.0MWH Series User Manual page 163

LUNA2000-2.0MWH Series Smart String ESS
User Manual
5.
6.
7.
8.
Step 6 Switch on the DC circuit breakers in the control unit cabin. (corresponding to
number 7 in
Table 7-2 Switch configuration
Models
LUNA2000-2.0MWH-1
HX
LUNA2000-2.0MWH-1
HX
LUNA2000-2.0MWH-2
HX
LUNA2000-2.0MWH-2
HX
Issue 08 (2022-11-15)
Figure 7-9 Position of the power switch in the extinguishant control panel
(1) Position of the right power switch in the
extinguishant control panel
Switch on the PSU AC input circuit breaker 6FCB1.
NO TE
If a 3 U subrack is configured, the PSU switch is in the subrack. If a 2 U subrack is
configured, the PSU switch is in (2) in the figure that shows switch positions.
On the subrack, switch on the DC input circuit breakers 7FCB1 and (optional)
7FCB2, the exhaust fan controller circuit breakers 7FCB4 and 7FCB5, and the
air conditioner circuit breaker 7FCB6 of the control unit cabin in sequence.
(corresponding to number 3 in
Switch on the circuit breakers of the battery pack fan in sequence.
(corresponding to number 4 in
Switch on the circuit breakers of the Smart Rack Controller. (corresponding to
number 4 in the figure of
the figure of
Copyright © Huawei Technologies Co., Ltd.
(2) Position of the left power switch in the
extinguishant control panel
the figure of
the figure of
switches)
switches)
Air Conditioner
Position in the Battery
Cabin
1/2/4/5/7/8/10/11
1/3/5/7/9/11
1/3/5/7/9/11
2/4/6/8/10/12
7 Powering On the System
switches)
switches)
DC Circuit Breakers No. in
the Control Unit Cabin
1Q2–6Q2
1Q2–6Q2
1Q2–3Q2
1Q2–3Q2
153