Huawei LUNA2000-2.0MWH Series User Manual page 24

LUNA2000-2.0MWH Series Smart String ESS
User Manual
●
Drilling Holes Nearby the Equipment
Do not drill holes on the equipment. Drilling holes may damage the container
airtightness, equipment electromagnetic containment, internal components, and
cables. Metal scraps generated during drilling holes may enter the equipment,
which will cause short circuits on circuit boards, affect equipment functions, or
damage the equipment.
●
●
●
Moving Heavy Objects
●
Issue 08 (2022-11-15)
When climbing a ladder, take the following precautions to reduce risks and
ensure safety:
– Keep your body steady.
– Do not climb higher than the fourth rung of the ladder from the top.
– Keep your center of gravity between the side rails, and do not overreach
to the sides.
NO TICE
Drill holes at proper positions to ensure that no short circuit is caused.
Wear protective equipment such as safety goggles and protective gloves when
drilling holes.
When drilling holes, protect the equipment from shavings. After drilling, clean
up any shavings.
When moving heavy objects, ensure that the number of operators meets the
requirements as shown in the following figure and make proper preparations.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
14