Caution For Compliance With Ec Directive; Compliance With Ukca Marking - Mitsubishi Electric MELSEC iQ-F Series User Manual

Caution for compliance with EC Directive

Caution for when the FX5-ENET is used
When using the FX5-ENET, attach a ferrite core to the power supply of the CPU module. When attaching the ferrite core,
make 2 turns within approximately 200 mm from the power cable terminal block and connectors. (Ferrite core used in tests by
Mitsubishi: E04SR401938 manufactured by SEIWA ELECTRIC MFG. CO., LTD.)
Caution for when the Ethernet port is used
Use a shielded twisted pair cable for the 10BASE-T/100BASE-TX cable.
Ensure that some part of the outer sheath is removed so as to expose the shield section as shown below and ground both
ends of the shielded twisted pair cable as large area as possible.

Compliance with UKCA marking

The requirements for compliance with UKCA marking are the same as that with EC directive (CE marking).
APPX
134
Appendix 2 Standards
Shield
Clamp metal fitting