Mitsubishi Electric MELSEC iQ-F Series User Manual page 38

■E-mail settings that are set to the Ethernet module
When the e-mail setting change function is used, instead of the e-mail settings configured with the module parameters in the
engineering tool, the e-mail settings stored in the e-mail setting storage area are set to the Ethernet module.
Ex.
The following figure shows a case where the sender e-mail address and sender name are set from the e-mail setting storage
area to the Ethernet module, resulting in the sender e-mail address being set to def@example.com and the sender name to
DEF.
When the Ethernet module is powered off and on or the CPU module is reset, or when the e-mail settings are stored in the e-
mail setting storage area, the e-mail settings in the e-mail setting storage area are set to the Ethernet module. If the settings
are not stored in the e-mail setting storage area, the e-mail settings configured with the module parameters in the engineering
tool are set to the Ethernet module.
Ethernet module
Sender e-mail address
Sender name
Values in the e-mail setting storage areas are set.
4 FUNCTION LIST
36
4.3 Other Functions
def@example.com
DEF
Module parameter
Sender e-mail address
Sender name
E-mail setting storage area
Sender e-mail address
Sender name
abc@example.com
ABC
def@example.com
DEF