Mitsubishi Electric MELSEC iQ-F Series User Manual page 166

■MQTT server IP address (Un\G108814 to Un\G108815)
Set an MQTT server (MQTT broker) IP address.
Use this when IP address specification is set.
• 00000001H to DFFFFFFEH
■MQTT server port number (Un\G108816)
Specify an MQTT server (MQTT broker) port number.
• 1 to 65534
■Client ID storage address (Un\G108817 to Un\G108818)
Specify a client ID storage location BFM address.
Set the number of characters at the top (one word) of the storage location.
Set the client ID in UTF-16 format following the number of characters. (One or more characters)
• 109007 to 109506
■User name storage address (Un\G108819 to Un\G108820)
Specify a user name storage location BFM address.
Set the number of characters at the top (one word) of the storage location.
Set the user name in UTF-16 format following the number of characters. (0 or more characters)
When user authentication is not required, both the user name and password are set to 0 characters.
• 109007 to 109506
■Password storage address (Un\G108821 to Un\G108822)
Specify a password storage location BFM address.
Set the number of characters at the top (one word) of the storage location.
Set the password in ASCII format following the number of characters. (0 or more characters)
When user authentication is not required, both the user name and password are set to 0 characters.
This area is not written when 2 (Execute (no password change)) is selected for the write execution.
• 109007 to 109506
■Server certificate verification (Un\G108823)
Select whether to check the server certificate.
This setting is available only when TLS is selected in the external device configuration.
• 0: Not verify
• 1: Verify
Tool setting change function
■Tool setting storage area write request (Un\G108872)
The tool settings are saved and reflected.
• 0: Not executed
• 1: Execute
• 2: Execute (no password change)
■Tool setting storage area write status (Un\G108873)
This area stores the tool setting write status.
Bit
b0
b1
■Tool setting storage area clear request (Un\G108874)
The tool settings are deleted.
• 0: Not executed
• 1: Execute
APPX
164
Appendix 4 Buffer Memory
0
1
0
1
Status
Not completed
Completed
Normal
Error