Mitsubishi Electric MELSEC iQ-F Series User Manual page 93

"Generate a New Client Certificate (Self-Signed Certificate)" window
The following figure shows the "Generate a New Client Certificate (Self-Signed Certificate)" window.
Item Description
Common Name Enter the common name to be described in the certificate.
One or more characters must be entered.
Organization Name Enter the organization name to be described in the certificate.
Organization Unit Enter the organizational unit name to be described in the certificate.
Locality Enter the locality name to be described in the certificate.
State Enter the state or province name to be described in the certificate.
Country Enter the country name to be described in the certificate.
An entered value must be within the setting range.
RSA Key Strength Select an RSA key length.
Signature Algorithm Select a signature algorithm.
Certificate Validity Select a validity period of the certificate.
[Generate] button Requests the Ethernet module to generate a client certificate (self-signed certificate) with
the specified contents.
• The [Generate] button is disabled until "Common Name" is specified.
• If the certificate function has been stopped, the function restarts after the certificate
generation.
[Cancel] button Closes this window to quit the processing.
Setting range
1 to 64 characters
(Default: Blank)
0 to 64 characters
(Default: Blank)
0 to 64 characters
(Default: Blank)
0 to 128 characters
(Default: Blank)
0 to 128 characters
(Default: Blank)
Blank or two one-byte letters
(upper-case character or lower-
case character)
(Default: Blank)
• 1024 bits
• 2048 bits
(Default: 2048 bits)
• SHA-1
• SHA-256
(Default: SHA-256)
• 1 day
• 1 week
• 1 month
• 1 year
• 2 years
• 10 years
(Default: 1 year)


8 APPLICABLE ENGINEERING TOOL
8.1 Certificate Configuration Tool for FX5-ENET
8
91