Installing Components In The Rack; Removing The Panel; Laying Rack-Embedded Cables Out - Huawei RP200 Room Presence Installation Manual

9 Installing Components in the Rack

9.1

Removing the Panel

1 Remove the speaker cover plate.
9.2

Laying Rack-Embedded Cables Out

The rack-embedded cables need to be laid out from the rack for subsequent connections.
Remove the rear access panel.
1
2
Remove the lower front panel of the rack.
Check the ties of the rack-embedded
2
cables, cut the ties labeled as "Remove
this tie" (as shown in the following figure),
and lay the cables out of the rack.
16